]> 01 Test 03 Testing Associated Text

OIL ALL THREADS AT ASSEMBLY, LUBRICATE ALL INTERNAL PARTS WITH SYSTEM FLUID AT ASSEMBLY. THE EXTERNAL NOTCHES ON EACH PART MUST BE IN LINE AT FINAL ASSEMBLY. THIS APPLIES TO BOTH CLOCKWISE AND COUNTER CLOCKWISE MODELS. INSTALL TAPER-LOCK STUDS IN PORT SECTION. TORQUE STUDS IN PORT SECTION TO 22-35 OB FT. THE LENGTH FROM FACE OF PORT SECTION TO THE END OF STUD SHOULD CORRESPOND TO THE "A" DIMENSION. THE TORQUE REQUIRED TO TURN DRIVE SHAFT MUST NOT EXCEED 40 LB IN. AFTER PUMP IS ASSEMBLED. 0-3311012-0-01 1-3311007-0-010-3311007-0-050-3311007-0-070-3311013-0-01 0-3311007-0-020-3311007-0-030-3311007-0-040-3311007-0-06 USE THIS DRAWING FOR PARTS INFORMATION ONLY.